Вернуться   Sat-life.info > Cпутниковые ресиверы > OpenBox и его аналоги > "Китайский" Опенбокс
Расширенный поиск
Загрузка...

 
  

Ответ
 
Опции темы Поиск в этой теме Опции просмотра
Старый 03.12.2010, 15:49   #11
Serjoga
 
Аватар для Serjoga
 
Регистрация: 30.11.2009
Страна проживания!
Сообщений: 37,418
Вы сказали Спасибо: 22,603
Поблагодарили 60,034 раз в 26,779 сообщениях
Репутация: 128672
Serjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond repute
По умолчанию

This is a modified Dump file, and was released on [03 December 2010]

This dump file is based on the the latest official firmware release
[HDS2-10-11-08:1100CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list [German HD Channels okay on Astra]
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.

================================================== =================================
What's New:
Updated christmas boot logo.
Updated channel list.
Sirius 5e renamed Astra 4A.
A number of channels added.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some have the tendancy to ignore the above request, and I have no idea why.

All the best
Laurals.

Вложения
Тип файла: zip HDS2_DUMP.zip (1.59 Мб, 48 просмотров)
Serjoga вне форума   Ответить с цитированием
Получено 2 "Спасибо" для Serjoga от:
Alex196625 (18.07.2011), mykolak (12.12.2010)
Реклама
Реклама на форуме
Старый 05.12.2010, 14:04   #12
serij1997
 
Аватар для serij1997
 
Регистрация: 13.03.2009
Страна проживания!
Сообщений: 185
Вы сказали Спасибо: 1,095
Поблагодарили 778 раз в 289 сообщениях
Репутация: 2291
serij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond reputeserij1997 has a reputation beyond repute
По умолчанию

Openbox_s9_lista_c+_cp_tnk_xXx_plradio (Список каналов)
Вложения
Тип файла: zip Openbox_s9_lista_c+_cp_tnk_xXx_plradio.zip (130.2 Кб, 60 просмотров)
serij1997 вне форума   Ответить с цитированием
Получено 2 "Спасибо" для serij1997 от:
mykolak (12.12.2010), Serjoga (05.12.2010)
Старый 08.12.2010, 06:21   #13
Serjoga
 
Аватар для Serjoga
 
Регистрация: 30.11.2009
Страна проживания!
Сообщений: 37,418
Вы сказали Спасибо: 22,603
Поблагодарили 60,034 раз в 26,779 сообщениях
Репутация: 128672
Serjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond repute
По умолчанию

Openbox_s9_lista_c+_cp_tnk_xXx_plradio
Вложения
Тип файла: zip Openbox_s9_lista_c+_cp_tnk_xXx_plradio_poprawiona.zip (129.8 Кб, 44 просмотров)
Serjoga вне форума   Ответить с цитированием
Получено 2 "Спасибо" для Serjoga от:
mykolak (12.12.2010), stasis (08.12.2010)
Старый 10.12.2010, 07:20   #14
Serjoga
 
Аватар для Serjoga
 
Регистрация: 30.11.2009
Страна проживания!
Сообщений: 37,418
Вы сказали Спасибо: 22,603
Поблагодарили 60,034 раз в 26,779 сообщениях
Репутация: 128672
Serjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond repute
По умолчанию

OpenBox S9 Modified Dump.file with Channel List [09 December 2010]
Вложения
Тип файла: zip HDS2_DUMP.zip (1.59 Мб, 35 просмотров)
Serjoga вне форума   Ответить с цитированием
Получено 2 "Спасибо" для Serjoga от:
Alex196625 (18.07.2011), mykolak (12.12.2010)
Старый 10.12.2010, 07:22   #15
Serjoga
 
Аватар для Serjoga
 
Регистрация: 30.11.2009
Страна проживания!
Сообщений: 37,418
Вы сказали Спасибо: 22,603
Поблагодарили 60,034 раз в 26,779 сообщениях
Репутация: 128672
Serjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond repute
По умолчанию

L53 Openbox S9 Multi-Satellite Channel List v2.20 [09 December 10]

This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom button and select the satellite you wish access from the data base.
The channel list Default Motor Setting: DisEqC 1.2.
The channel list Default Channel Editor: SetEditHD100.
---------------------------------------------------------------------------
What's New:
A number of new or updated channel included on various satellites, including 5e, 13e, 16e, 28.2e
A number of non accessable channels removed from various satellites.
---------------------------------------------------------------------------
To install this channel list simply transfer the unzipped channel list to a USB Stick, and then insert it into the USB port, located on the rear of the receiver, then follow the instructions below.
Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Image File[*.abs]'
then select 'Upgrade File' and use the < > arrow keys to scroll through the files and select the [L53_S9 channel list] then click Start.
Once the file have been installed, you can then click the 'Zoom' button to directly select and goto any satellite from within the data base.

Anyone may use, or share this multi-satellite channel list, all I ask is that you do not remove or edit any the files included in the zip, or include any additional files, as certain sites tend to include a load of spam text links, and remove the original download site, guess they want to make you belive they created the channel list themselves ....

All the best
Laurals.
Вложения
Тип файла: zip L53_S9_multi_channel_list_v2.20.zip (1.60 Мб, 48 просмотров)
Serjoga вне форума   Ответить с цитированием
Получено 4 "Спасибо" для Serjoga от:
Alex196625 (11.04.2011), jjaco71 (10.12.2010), maral100 (10.12.2010), mykolak (12.12.2010)
Старый 24.12.2010, 08:07   #16
Serjoga
 
Аватар для Serjoga
 
Регистрация: 30.11.2009
Страна проживания!
Сообщений: 37,418
Вы сказали Спасибо: 22,603
Поблагодарили 60,034 раз в 26,779 сообщениях
Репутация: 128672
Serjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond repute
По умолчанию

OpenBox S9 Modified Dump.file with Channel List [23 December 2010]

This is a modified Dump file, and was released on [23 December 2010]
This dump file is based on giemware version [HDS2-10-11-08:1100CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default motor setting is: DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Also included in the zip file is a replace.list.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
A number of new or updated channel included on, 11w, 4w, 1w, 5e, 9e, 13e, 16e, 19.2e & 28.2e
A number of non accessable channels removed from various satellites.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line: X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some have the tendancy to ignore the above request, and I have no idea why.

All the best
Laurals.

Вложения
Тип файла: zip HDS2_DUMP.zip (1.59 Мб, 24 просмотров)
Serjoga вне форума   Ответить с цитированием
Получено 1 "Спасибо" для Serjoga от:
jjaco71 (24.12.2010)
Старый 04.01.2011, 08:22   #17
Serjoga
 
Аватар для Serjoga
 
Регистрация: 30.11.2009
Страна проживания!
Сообщений: 37,418
Вы сказали Спасибо: 22,603
Поблагодарили 60,034 раз в 26,779 сообщениях
Репутация: 128672
Serjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond repute
По умолчанию

OpenBox S9 Modified L53 Dump.file with Channel List [02 January 2011]

Читать дальше... 
This is a modified Dump file, and was released on [02 January 2011]
This dump file is based on firmware version [HDS2-10-11-08:1100CMT]

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
Well over 200 new or updated channel on all satellites.

The most noticable change is on Eurobird 9A [9east]

A number of non accessable channels removed from various satellites.

I believe all the channels that cause rebooting problems, have now been removed.

To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line: X: {{ 1833 } { 1702 }}
================================================== =================================


Thanks to

Laurals.
Вложения
Тип файла: zip HDS2_DUMP.zip (1.57 Мб, 34 просмотров)

Последний раз редактировалось maral100; 10.01.2011 в 20:51.
Serjoga вне форума   Ответить с цитированием
Получено 1 "Спасибо" для Serjoga от:
mykolak (08.01.2011)
Старый 07.01.2011, 01:01   #18
jjaco71
Неактивный
 
Аватар для jjaco71
 
Регистрация: 10.12.2010
Сообщений: 6
Вы сказали Спасибо: 18
Поблагодарили 23 раз в 7 сообщениях
Репутация: 77
jjaco71 will become famous soon enough
По умолчанию New Official Firmware [HDS2-11-01-02:0899CMT] and L53_MOD_Dump.

This is a New Official Firmware version, and was released on [06 January 2011]
The New Official Firmware version do not include any channels.

Читать дальше... 
The L53_MOD dump file is based on firmware version [HDS2-11-01-02:0899CMT]
The modified download includes a full channel list pre-installed.

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
In version [HDS2-11-01-02:0899CMT] the following have either been added, fixed or changed:
1 .. Making a full system dump is now fixed.
2 .. CCcam Priority option added.
3 .. Security Password when entering sections such as the CCcam secrion has now been deactivated.
4 .. On Bootup the display will once again show the IP Address used in your clines.
6 .. A few minor bugs addressed, making the receiver more stable.

Well over 200 new or updated channels on various satellites.
Re-organised channel list on a number of satellites.
A number of non accessable channels removed from various satellites.

I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_L53_MOD file, includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project WITH REGULAR UPDATES.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line: X: {{ 1833 } { 1702 }}
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some still have a tendancy to ignore the above request
Вложения
Тип файла: zip NM_HDS2_CMT_1101030405.zip (2.97 Мб, 63 просмотров)

Последний раз редактировалось maral100; 10.01.2011 в 20:52.
jjaco71 вне форума   Ответить с цитированием
Получено 3 "Спасибо" для jjaco71 от:
bob45 (05.03.2015), mykolak (08.01.2011), Serjoga (07.01.2011)
Старый 10.01.2011, 20:31   #19
jjaco71
Неактивный
 
Аватар для jjaco71
 
Регистрация: 10.12.2010
Сообщений: 6
Вы сказали Спасибо: 18
Поблагодарили 23 раз в 7 сообщениях
Репутация: 77
jjaco71 will become famous soon enough
По умолчанию OpenBox S9 Modified L53 Dump.file with Channel List [10 January 2011]

This is a modified L53 Dump file, and was released on [10 January 2011]
This L53_MOD Dump file is based on the latest firmware version [HDS2-11-01-02:0899CMT]

Читать дальше... 
Included in the L53_MOD Dump file is a multi-satellite channel list [V2.60].
The channel list default motor setting is: DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list
Also included is a constant cw file, which contains active Biss keys, mainly for use on 26E 10E 5E & 4W.

The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
A number of new or updated channels on various satellites added.
Re-organised channel list on various satellites.
Most non accessable channels removed.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your located in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_L53_MOD file, includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project WITH REGULAR UPDATES.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Setup -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the list has been correctly added, by clicking Manage Config Files and clicking on replace.list if all went well, you will see the following example: X: {{ 1833 } { 1702 }}
================================================== =================================

How to add the Constant cw list.
Click Menu -> Network Setup -> CCam Client Setup -> Update Files by USB
-> Constant cw now click either the OK or Green button to select Constant cw and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the keys have been correctly added, by clicking Manage Config Files and clicking on Constant cw if all went well, you will see all the keys listed.
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some still have a tendancy to ignore the above request.
Вложения
Тип файла: zip HDS2_DUMP_100111.zip (1.60 Мб, 77 просмотров)

Последний раз редактировалось maral100; 10.01.2011 в 20:54. Причина: Красным весь текст не выделять - только отдельные фразы
jjaco71 вне форума   Ответить с цитированием
Получено 4 "Спасибо" для jjaco71 от:
bob45 (05.03.2015), maral100 (10.01.2011), mykolak (11.02.2011), Serjoga (11.01.2011)
Старый 14.01.2011, 13:26   #20
Serjoga
 
Аватар для Serjoga
 
Регистрация: 30.11.2009
Страна проживания!
Сообщений: 37,418
Вы сказали Спасибо: 22,603
Поблагодарили 60,034 раз в 26,779 сообщениях
Репутация: 128672
Serjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond reputeSerjoga has a reputation beyond repute
По умолчанию

L53 Openbox S9 Multi-Satellite Channel List v3.00 - released on [14 January 2011]
This channel list is best used with either the latest official Firmware or with the latest L53_MOD_Dump file.



Код:
This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.

Default Settings:
Default Motor Setting: DisEqC 1.2.
Default LNB Setting: Universal [9750 - 10600]
---------------------------------------------------------------------------

What's New:
Channel list format changed to [.dbs]
A number of new or updated channel added on all satellites.
---------------------------------------------------------------------------

Installation Instructions:
To avoid any possable conflicts, it is always wise to delete the channels from your receiver before installing.
To remove all channels click Menu -> Edit Channel -> Delete All

To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.

Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files' then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button, when you see a check mark or tick next to the TP_PROG, click the yellow button to install.

Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.
---------------------------------------------------------------------------

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some still have a tendancy to ignore the above request.
Вложения
Тип файла: zip L53_S9_multi_channel_list_v3.00.zip (286.6 Кб, 68 просмотров)
Serjoga вне форума   Ответить с цитированием
Получено 2 "Спасибо" для Serjoga от:
Alex196625 (11.04.2011), mykolak (11.02.2011)
Ответ

Социальные закладки

Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.


Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
Openbox/Skybox F4, Skybox F3/M3, Openbox X3/Q3 credo "Китайский" Опенбокс 72 06.05.2018 18:20


Текущее время: 12:52. Часовой пояс GMT +2.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc. Перевод: zCarot
Яндекс цитирования Яндекс.Метрика
Время генерации страницы 0.27927 секунды с 20 запросами